Monday, 29 August 2011

William Boniface - The Extraordinary Adventures of Ordinary Boy 01 - The Hero Revealed (epub)

Image
In the town of Superopolis, everyone has a superpower. Everyone, that is, except Ordinary Boy. But things are not so super in Superopolis these days with the evil Professor Brain-Drain on the loose! To make matters worse, Ordinary Boy and his friends are thrown into the middle of a baffling mystery. Forget the regular superheroes. In a city where everyone is extraordinary, this just might be a job for . . . Ordinary Boy.


Code:
http://www.filesonic.com/file/360118201/William_.rar

Michael Ondaatje - Divisadero (v5.0) (epub)

Image
From the celebrated author of The English Patient and In the Skin of a Lion comes a remarkable new novel of intersecting lives that ranges across continents and time.

In the 1970s in Northern California, near Gold Rush country, a father and his teenage daughters, Anna and Claire, work their farm with the help of Coop, an enigmatic young man who makes his home with them. Theirs is a makeshift family, until it is riven by an incident of violence—of both hand and heart—that sets fire to the rest of their lives.

Divisadero takes us from the city of San Francisco to the raucous backrooms of Nevada's casinos and eventually to the landscape of south-central France. It is here, outside a small rural village, that Anna becomes immersed in the life and the world of a writer from an earlier time—Lucien Segura. His compelling story, which has its beginnings at the turn of the century, circles around “the raw truth” of Anna's own life, the one she's left behind but can never truly leave. And as the narrative moves back and forth in time and place, we discover each of the characters managing to find some foothold in a present rough hewn from the past.

Breathtakingly evoked and with unforgettable characters, Divisadero is a multilayered novel about passion, loss, and the unshakable past, about the often discordant demands of family, love, and memory. It is Michael Ondaatje's most intimate and beautiful novel to date.


Michael Ondaatje - The English Patient (v5.0) (epub)
Image
Set in 1945, The English Patient explores the lives of four very disparate wartorn people, a young woman and three men, who take refuge in a damaged villa north of Florence as the war retreats around them. In an upstairs room lies the badly burned English patient, alive but unable to move. His extraordinary adventures and turbulent love affair in the North African desert before the war provide the focus around which the vivid tales of his companions revolve. His very presence will for ever change the destiny of those around him... This is a breathtaking story of love and passion that twists through London's Blitz and the intricacies of bomb disposal, through the mysterious, often dangerous world of desert exploration. Beautifully read by internationally acclaimed actor Ralph Fiennes who also starred in the multi Oscar winning film by Anthony Minghella.


Code:
http://www.filesonic.com/file/360113161/Mic.rar

Vladimir Nabokov - Speak, Memory, An Autobiography Revisited (epub)

Image
The late Vladimir Nabokov always did things his way, and his classic autobiography is no exception. No dry recital of dates, names, and addresses for this linguistic magician--instead, Speak, Memory is a succession of lapidary episodes, in which the factoids play second fiddle to the development of Nabokov's sensibility. There is, to be sure, an impressionistic whirl through the author's family history (including a gallery of Tartar princes and fin-de-siècle oddities). And Nabokov's account of his tenure at St. Petersburg's famous Tenishev School--where he counted Osip Mandelstam among his schoolmates--offers a lovely glimpse into the heart of Russia's silver age. Still, Nabokov is much too artful an autobiographer to present Speak, Memory as a slice of reality--a word, by the way, that he insisted must always be surrounded by quotation marks.


Code:
http://www.filesonic.com/file/360098571/Vlad.rar

Cornelia Funke - Reckless 01 - Reckless (v5) (mobi)

Image
For years, Jacob Reckless has been secretly disappearing to another world, a world behind a mirror, a world for which his father abandoned his family. The mirror world is Jacob's escape from reality. It's a place for treasure hunts and magnificent quests. A world where witches haunt the forests and giants and dwarfs roam. A world locked in a deadly war.

Jacob's secret seems safe, until one day his younger brother Will follows him, with disastrous consequence. Faced with a curse that is quickly turning Will to stone, the Reckless brothers are thrust into a race against time to find a cure before Will is lost forever.

Inspired by the Brothers Grimm, master storyteller Cornelia Funke introduces a lush, enchanting world where fantasy meets reality. Reckless is a thrilling adventure, a tale of heroism and loyalty, filled with danger, mystery, and magic--with fairy tales and legends re-imagined as never before.


Code:
http://www.filesonic.com/file/360081791/Cornelia_Fu.rar

Pro ASP.NET MVC 3 Framework, 3rd Edition (Final Version)



Image




Quote:
Pro ASP.NET MVC 3 Framework, 3rd Edition
Publisher: Apr.,.ess | 2011 | 852 Pages | ISBN: 1430234040 | PDF | 12 Mb
The ASP.NET MVC 3 Framework is the latest evolution of Microsoft’s ASP.NET web platform. It provides a high-productivity programming model that promotes cleaner code architecture, test-driven development, and powerful extensibility, combined with all the benefits of ASP.NET 4.
In this third edition, the core model-view-controller (MVC) architectural concepts are not simply explained or discussed in isolation, but are demonstrated in action. You’ll work through an extended tutorial to create a working e-commerce web application that combines ASP.NET MVC with the latest C# language features and unit-testing best practices. By gaining this invaluable, practical experience, you’ll discover MVC’s strengths and weaknesses for yourself—and put your best-learned theory into practice.

The book's authors Steve Sanderson and Adam Freeman have both watched the growth of ASP.NET MVC since its first release. Steve is a well-known blogger on the MVC Framework and a member of the Microsoft Web Platform and Tools team. Adam started designing and building web applications 15 years ago and has been responsible for some of the world's largest and most ambitious projects. You can be sure you are in safe hands.

What you’ll learn
Gain a solid architectural understanding of ASP.NET MVC 3, including basic MVC
Explore the entire ASP.NET MVC Framework
See how MVC and test-driven development work in action
Capitalize on your existing knowledge quickly and easily through comparison of features in classic ASP.NET to those in ASP.NET MVC
Learn about the latest security and deployment issues, including those related to IIS 7

Who this book is for
This book is for web developers with a basic knowledge of ASP.NET and C# who want (or need) to start using the new ASP.NET MVC 3 Framework.




Image
Code:
http://www.wupload.com/file/73105321/073111.BO.Pro.ASP.NET.MVC.3.Framework.rar

Digital Photoshop Tutorials:High-End Retouching Tutorial


Image

Digital Photoshop Tutorials: High-End Retouching Tutorial | 8.69 GB
As you already know, the high end retouching industry has been very tight lipped about the techniques they use to produce world class results for magazines, advertising campaigns, displays and billboards throughout the world.
The only techniques that have been readily available to the public have been the so called ?smooth or soft skin? methods that simply blur or smudge the skin texture into an unrealistic plastic doll mess.
+This DVD-ROM contains the information you have been seeking but could not find. Your host Vitaly Druchinin, high end photographer and retoucher reveals all, first by thoroughly explaining to you how to apply Photoshop tools and functions specifically for retouching. Then hold on to your chair as Vitaly puts you front and center in front of his monitor as he retouches a beauty image captured with the Hasselblad H3D 39 Megapixel camera from start to finish, explaining every step and decision along the way. You will see first hand how to masterfully manipulate your images without destroying even a single pore of your model?s skin.
In an unprecedented move, the following original RAW files and complete Photoshop (PSD) files are included for you to explore and experiment with.
Skill Level: Beginner/Intermediate

DVD1
Table of Contents
Part One: Retouching Tools Part Two: Complete Retouching

1. Introduction
2. Levels
3. Color balance
4. Hue/Saturation
5. Clone Stamp
6. Healing brush
7. Brush tool
8. History brush
9. Dodge & burn
10. Eye Dropper
11. Liquify
12. Warp
13. Unsharp Mask

1. Introduction
2. 3D Modeling excersize
3. ACR developing
4. Retouch setup
5. Image healing
6. Hair shape with liquify
7. Head shape with warp
8. Ear & eye shaping
9. Modeling with dodge & burn
10. Wrinkle fading
11. Removing ear piercing
12. Hiding ear vains
13. Reshaping lips
14. Adding lip color
15. Removing eye vains
16. Fading eye redness
17. Teeth whitening
18. Teeth de-yellowing
19. Teeth shaping
20. Adding lashes
21. Filling in hair
22. Hair shape liquifying
23. Darkening lashes
24. Making pupils pop
25. Shaping the body
26. Removing fly hairs
27. Local contrast
28. Sharpening

Specifications
* Runtime: 3 hours
* Mac & PC compatible
* Video Resolution: 800?600
* DVD-ROM Content Size: 3.19 GB

Minimum system requirements:
* Resolution: 1024 x 768
* DVD-ROM Drive & Speakers
* PC: 800Mhz Pentium / Windows 98
* MAC: G4 / OS X 10.4 ?Tiger?

DVD 2
Beauty & Hair Retouching High End Techniques
Completely new, updated and greatly expanded (11.5hours), Beauty & Hair Retouching High End Techniques ? Series Two is hosted by the world renowned retouching artist, Natalia Taffarel. She is famous for her natural and completely seamless retouching style that is all about beauty and details. She leaves nothing a secret and holds nothing back as she explains in great detail her entire workflow and techniques, all the things she is famous for, her beauty and hair work. Natalia has a huge following and her DVD has been greatly anticipated by the retouching community for years and now, the wait is finally over!
The video is a screen recording with audio narration that makes you feel as if you have a private one on one instructor who sat you in front of their computer while they show you their techniques and explain every single step. You have full control of the playback and can easily pause, go back or skip forward to match your own pace.
All of the image files Natalia uses in the video are included for you to follow along and practice on for yourself. This includes the RAW and complete layered PSD files.
Skill Level: Intermediate/Advanced
Specifications

* Version: CS4
* Runtime: 11.5 hours
* Mac & PC compatible
* Video Resolution: 800?600

Two Disc Set:
* Disc 1: Video Tutorials
* Disc 2: Work Files

Minimum system requirements:
* Resolution: 1280 x 1024
* DVD-ROM Drive & Speakers
* PC: 800Mhz Pentium / Windows 98
* MAC: G4 / OS X 10.4 ?Tiger?

Image
Download From Wupload

Code:

http://www.wupload.com/file/127893475/dpr-Beauty.part01.rar
http://www.wupload.com/file/127893476/dpr-Beauty.part02.rar
http://www.wupload.com/file/127893477/dpr-Beauty.part03.rar
http://www.wupload.com/file/127893478/dpr-Beauty.part04.rar
http://www.wupload.com/file/127893479/dpr-Beauty.part05.rar
http://www.wupload.com/file/127893480/dpr-Beauty.part06.rar
http://www.wupload.com/file/127893481/dpr-Beauty.part07.rar
http://www.wupload.com/file/127893482/dpr-Beauty.part08.rar
http://www.wupload.com/file/127893483/dpr-Beauty.part09.rar
http://www.wupload.com/file/127893484/dpr-Beauty.part10.rar
http://www.wupload.com/file/127893485/dpr-Beauty.part11.rar
http://www.wupload.com/file/127893486/dpr-Beauty.part12.rar
http://www.wupload.com/file/127893487/dpr-Beauty.part13.rar

Getting Your RS Back If Scammed

Hi all

After shef and I recovered our collector account, we felt its important to let everyone else to know how to recover their precious RS accounts (whether premium or free accounts) if lost to scammers, and show those ~~~~ out there that they can go screw themselves.

From Rapidshare


Quote:
The most important thing is an exact copy of the error-message and your account-details.

Name*: ...
E-Mail*: ...
Login-ID*: ...
Transaction-ID*: ...
Date of account-creation: ...
Date of payment**: ...

* This has to be the details you used when you paid for your account. You can find your transaction-ID in your Paypal account.
** If you used an eCheck.


Code:
support@rapidshare.com


Here is what we did provided for Rapidshare Technical Support to get our accounts back:

1. Account name: Login ID and the aliases you've used
2. Date of creation
3. Date of thievery
4. A copy of the LOGS (where the IPs are recorded) and tell RS which ones are friendly and get them to blacklist the hostile ones (which are most likely ones belonged to the scammer)
5. Email used to create the account
6. All emails that have been applied to the account
7. Make a backup of all the links of the files uploaded to the account (use that extract link option)

IMPORTANT - Rapidshare asked us to give them a few links of uploaded content, I think they use them to track the account so its vital for you to have a clear record of what have been uploaded to your account and what their links are.

8. Tell them the Number of files uploaded and the Total Size of the files uploaded. Simply copy paste the account status on your main menu.
9. Tell them how many points you have got.
10. Take screenshots of Your Main Menu, Your LOGS, Your OPTIONS


Tips:

- Make sure your email is sincere. formal and honest. Don't be aggressive, they reply really fast and they are nice people.
- Tell them a good reason why your account MUST be recovered. Shef and I said our account contained confidential and very personal information that are very important to our family etc...


Enjoy this guide. :mrredhat:

A n00bs starter guide to warez files


Image

1.What is a RAR file
RAR is the native format of WinRAR archiver. Like other archives, RAR files are data containers, they store one or several files in the compressed form. After you downloaded RAR file from Internet, you need to unpack its contents in order to use it.

2.How to handle RAR files
WinRAR provides the complete support for RAR files, so you may both create and unpack them. If you installed WinRAR on your computer and downloaded RAR file from Internet, you may double click on RAR file icon to open it in WinRAR, select all files, press "Extract To" button, enter a destination path and press "OK". Another way is to click on the RAR file in Explorer using the right mouse button. If you enabled "Shell integration" option when installing WinRAR, the file context menu will contain "Extract to ..." item.

Some RAR files can be parts of multi-volume sequences. In WinRAR you can split a huge archive to a few smaller files, which are called volumes. They may have extensions .rar (the first volume), .r00, .r01, ..., or .part1.rar (the first volume), .part2.rar, ..., etc. If you need to unpack volumes, place all them to the same folder and start extraction from the first volume.

Image
3.What is a ZIP file
A file format that compresses data to a small fraction of its original size in bytes. This makes transfer across a network or the Internet much faster. A single ZIP file can contain many individual files that will be reconsituted after the data is uncompressed. The ZIP format is used by many file compression programs. In order to use a file that has been compressed into a ZIP file, you must have a compression/uncompression software program ie WINZIP OR WINRAR.


4.What is a FTP (File Transfer Protocol)Site
An FTP site is like a large filing cabinet. With a traditional filing cabinet, the person who does the filing has the option to label and organize the files how ever they see fit. They also decide which files to keep locked and which remain public. It is the same with an FTP site.

The virtual 'key' to get into an FTP site is the UserID and Password. If the creator of the FTP site is willing to give everyone access to the files, the UserID is 'anonymous' and the Password is your e-mail address (e.g. name@domain.com). If the FTP site is not public, there will be a unique UserID and Password for each person who is granted access.

When connecting to an FTP site that allows anonymous logins, you're frequently not prompted for a name and password. Hence, when downloading from the Internet, you most likely are using an anonymous FTP login and you don't even know it.

To make an FTP connection you can use a standard Web browser (Internet Explorer, Netscape, etc.) or a dedicated FTP software program(flashFXP), referred to as an FTP 'Client'.

5.what is a ISO
ISO files are actually images of complete CDs compiles as one whole image.ISO images can be loaded into several different CD recording software packages to create CDs ie.ALCOHOL 120% or NERO.


6.what is a BIN & CUE file
So you have downloaded two files, one with a .bin extension and one with a .cue extension. "What do I do with these?" you ask. There are a number of options.

BURN TO CD

You will need either NERO or ALCOHOL 120%.
To burn with NERO:
Start NERO, choose FILE, choose BURN IMAGE, locate the .cue file you have and double click it. A dialog box will come up, for anything other than music make sure you choose DISC-AT-ONCE (DAO). You can also turn off the simulation burn if you so choose.
Then burn away.
To burn with ALCOHOL 120%
Start ALCOHOL 120%,choose image burning wizard,locate the .cue file you have and double click it.

.CUE ERRORS
The most common error you will get with a .cue file is when it points to an incorrect path. This is easily fixed. Find the .bin file, copy the exact title including the .bin extension. Now find the .cue file, open the .cue file using notepad. It should look similar to this:

FILE "name of file.bin" BINARY
TRACK 01 MODE2/2352
INDEX 01 00:00:00
TRACK 02 MODE2/2352
INDEX 00 00:04:00
INDEX 01 00:06:00

Delete everything in the quotes, in this case we would
delete name of file.bin. Now place the title you copied
in between the quotes. Save the changes and close out.
Thats it, your .cue file should work now.
If your missing a .cue file you can make one easily using the tiny application found here:

Code:
http://www.dslreports.com/r0/download/373724~1e45059000cfc371c157f544cc5aef07/MakeCue.zip


OTHER WAYS TO USE .BIN & .CUE FILES


VCDGear:
This program will allow you to extract MPEG streams from CD images, convert VCD files to MPEG, correct MPEG errors, and more.

Daemon Tools:
This program creates a virtual drive on your PC which will allow you to "mount" the .cue file and use whatever is in the .bin file without having to burn it to a cd.

ISOBuster:
This program will allow you to "bust" open the .bin file and extract the files within the .bin

open the .bin file with vlc media player
Code:
http://www.videolan.org/vlc/
info provided by Full Mental Jacket.




7.What is a MP3 file
Moving Picture Experts Group Audio Layer 3 File. MP3 files are highly compressed audio tracks, and are very popular on the Internet.

8.What is a OGG VORBIS file
Ogg Vorbis is a new audio compression format. It is roughly comparable to other formats used to store and play digital music, such as MP3, VQF, AAC, and other digital audio formats. It is different from these other formats because it is completely free, open, and unpatented.

9.What is a MPEG file
MPEG-1(.mpg, .dat) is the predecessor to MPEG-2 used for DVDs. MPG files are a lower quality/bitrate format usually at half of the resolution of DVD VOB files. They encompass CD quality 2 channel audio, as opposed to the 5.1 channels found in some DVD VOB files. Quality depends on the encoder used, and can be quite good if done properly.

10What is a AVI file
An AVI is a container format that will hold audio and video. Windows Media Player does support playback of AVI files, but in the past few years their have been many new codec's developed to compress the audio and the video that is inside the AVI file ie DivX, XviD, 3ivX.


11What is a WMV file
WMV is a generic name of Microsoft's video encoding solutions and doesn't necessarily define the technology what it uses -- since version 7 (WMV7) Microsoft has used its own flavour of MPEG-4 video encoding technology (not very surprising, it's not compatible with other MPEG-4 technologies..)

12 What is a rmvb file
this is a file specifically made to be played with Realplayer,the files can be smaller than standard mpeg files

13 What is a MKV file
The Matroska Multimedia Container is an open standard free Container format, a file format that can hold an unlimited number of video, audio, picture or subtitle tracks inside a single file.
[1] It is intended to serve as a universal format for storing common multimedia content, like movies or TV shows. Matroska is similar in conception to other containers like AVI, MP4 or ASF, but is completely open source. Matroska file types are .MKV for video (and audio) and .MKA for audio-only files.

14a.what is x264
x264 is a free software library for encoding H.264/MPEG-4 AVC video streams.

14b.What is H.264
H.264 is a standard for video compression, and is equivalent to MPEG-4 Part 10, or MPEG-4 AVC (for Advanced Video Coding). As of 2008[update], it is the latest block-oriented motion-compensation-based codec standard developed by the ITU-T Video Coding Experts Group (VCEG) together with the ISO/IEC Moving Picture Experts Group (MPEG), and it was the product of a partnership effort known as the Joint Video Team (JVT). The ITU-T H.264 standard and the ISO/IEC MPEG-4 Part 10 standard (formally, ISO/IEC 14496-10) are jointly maintained so that they have identical technical content.

I recommend using Media Player Classic for HD movies as it is not system heavy.
Code:
http://mpc-hc.sourceforge.net/


Image
15.what does PDF stand for
Portable Document Format It is a file format created by Adobe Systems in 1993 for document exchange. PDF is used for representing two-dimensional documents in a manner independent of the application software, hardware, and operating system.[1]
Each PDF file encapsulates a complete description of a fixed-layout 2-D document (and, with Acrobat 3-D, embedded 3-D documents) that includes the text, fonts, images, and 2-D vector graphics which compose the documents.
Formerly a proprietary format, PDF was officially released as an open standard on July 1, 2008.

16.What is an EXE File
An exe file (pronounced as letters E-X-E) is a computer file that ends with the extension ".exe" otherwise known as an executable file. When one clicks on an exe file, a built-in routine automatically executes code that can set several functions into motion. Exe files are used to install and run programs and routines.

Because of the potential harm, when downloading any exe file it's a good idea to scan it with a reputable virus scanner before clicking on it. To this end, security experts recommend setting browsers so that websites cannot load programs automatically. This gives the surfer the chance to monitor which programs get passed to his or her computer.

hope this guide will help all the n00bs out there.
please feel free to add anything that you feel is relevant to a n00b

Bounce.

Guide To Understanding The Jargon Of Movie Releases

This great FAQ should be helpful for all the n00bs who are wondering what telesync, CAM, screeners etc are.

Sources

CAM -
A cam is a theater rip usually done with a digital video camera. A mini tripod is sometimes used, but a lot of the time this wont be possible, so the camera make shake. Also seating placement isn't always idle, and it might be filmed from an angle. If cropped properly, this is hard to tell unless there's text on the screen, but a lot of times these are left with triangular borders on the top and bottom of the screen. Sound is taken from the onboard microphone of the camera, and especially in comedies, laughter can often be heard during the film. Due to these factors picture and sound quality are usually quite poor, but sometimes we're lucky, and the theater will be fairly empty and a fairly clear signal will be heard.

TELESYNC (TS) -
A telesync is the same spec as a CAM except it uses an external audio source (most likely an audio jack in the chair for hard of hearing people). A direct audio source does not ensure a good quality audio source, as a lot of background noise can interfere. A lot of the times a telesync is filmed in an empty cinema or from the projection booth with a professional camera, giving a better picture quality. Quality ranges drastically, check the sample before downloading the full release. A high percentage of Telesyncs are CAMs that have been mislabeled.

TELECINE (TC) -
A telecine machine copies the film digitally from the reels. Sound and picture should be very good, but due to the equipment involved and cost telecines are fairly uncommon. Generally the film will be in correct aspect ratio, although 4:3 telecines have existed. A great example is the JURASSIC PARK 3 TC done last year. TC should not be confused with TimeCode , which is a visible counter on screen throughout the film.

SCREENER (SCR) -
A pre VHS tape, sent to rental stores, and various other places for promotional use. A screener is supplied on a VHS tape, and is usually in a 4:3 (full screen) a/r, although letterboxed screeners are sometimes found. The main draw back is a "ticker" (a message that scrolls past at the bottom of the screen, with the copyright and anti-copy telephone number). Also, if the tape contains any serial numbers, or any other markings that could lead to the source of the tape, these will have to be blocked, usually with a black mark over the section. This is sometimes only for a few seconds, but unfortunately on some copies this will last for the entire film, and some can be quite big. Depending on the equipment used, screener quality can range from excellent if done from a MASTER copy, to very poor if done on an old VHS recorder thru poor capture equipment on a copied tape. Most screeners are transferred to VCD, but a few attempts at SVCD have occurred, some looking better than others.

DVD-SCREENER (DVDscr) -
Same premise as a screener, but transferred off a DVD. Usually letterbox , but without the extras that a DVD retail would contain. The ticker is not usually in the black bars, and will disrupt the viewing. If the ripper has any skill, a DVDscr should be very good. Usually transferred to SVCD or DivX/XviD.

R5 LINE (R5) -
R5 refers to a specific format of DVD released in DVD Region 5, the former Soviet Union, and bootlegged copies of these releases that are distributed on the Internet. In an effort to compete with movie piracy, the movie industry chose to create a new format for DVD releases that could be produced more quickly and less expensively than traditional DVD releases. R5 releases differ from normal releases in that they are usually a direct Telecine transfer of the film without any of the image processing common on DVD releases, and without any special features. This allows the film to be released for sale at the same time that DVD Screeners are released. Since DVD Screeners are the chief source of high-quality pre-DVD release pirated movies, this allows the movie studios to beat the pirates to market. In some cases, R5 DVDs may be released without an English audio track, requiring pirates to use the direct line audio from the film's theatrical release. In this case, the pirated release should be tagged with ".LINE" to distinguish it from a release with a DVD audio track.

The image quality of an R5 release is generally comparable to a DVD Screener release, except without the added scrolling text and black and white scenes that serve to distinguish screeners from commercial DVD releases. The quality is better than Telecine transfers produced by movie pirates because the transfer is performed using professional-grade film scanning equipment.

DVDRip -
A copy of the final released DVD. If possible this is released PRE retail (for example, Star Wars episode 2) again, should be excellent quality. DVDrips are released in SVCD and DivX/XviD.

VHSRip -
Transferred off a retail VHS, mainly skating/sports videos and XXX releases.

TVRip -
TV episode that is either from Network (capped using digital cable/satellite boxes are preferable) or PRE-AIR from satellite feeds sending the program around to networks a few days earlier (do not contain "dogs" but sometimes have flickers etc) Some programs such as WWF Raw Is War contain extra parts, and the "dark matches" and camera/commentary tests are included on the rips. PDTV is capped from a digital TV PCI card, generally giving the best results, and groups tend to release in SVCD for these. VCD/SVCD/DivX/XviD rips are all supported by the TV scene.

WORKPRINT (WP) -
A workprint is a copy of the film that has not been finished. It can be missing scenes, music, and quality can range from excellent to very poor. Some WPs are very different from the final print (Men In Black is missing all the aliens, and has actors in their places) and others can contain extra scenes (Jay and Silent Bob) . WPs can be nice additions to the collection once a good quality final has been obtained.

DivX Re-Enc -
A DivX re-enc is a film that has been taken from its original VCD source, and re-encoded into a small DivX file. Most commonly found on file sharers, these are usually labeled something like Film.Name.Group(1of2) etc. Common groups are SMR and TND. These aren't really worth downloading, unless you're that unsure about a film u only want a 200mb copy of it. Generally avoid.

Watermarks -
A lot of films come from Asian Silvers/PDVD (see below) and these are tagged by the people responsible. Usually with a letter/initials or a little logo, generally in one of the corners. Most famous are the "Z" "A" and "Globe" watermarks.

Asian Silvers / PDVD -
These are films put out by eastern bootleggers, and these are usually bought by some groups to put out as their own. Silvers are very cheap and easily available in a lot of countries, and its easy to put out a release, which is why there are so many in the scene at the moment, mainly from smaller groups who don't last more than a few releases. PDVDs are the same thing pressed onto a DVD. They have removable subtitles, and the quality is usually better than the silvers. These are ripped like a normal DVD, but usually released as VCD.

Formats

VCD -
VCD is an mpeg1 based format, with a constant bitrate of 1150kbit at a resolution of 352x240 (NTCS). VCDs are generally used for lower quality transfers (CAM/TS/TC/Screener(VHS)/TVrip(analogue) in order to make smaller file sizes, and fit as much on a single disc as possible. Both VCDs and SVCDs are timed in minutes, rather than MB, so when looking at an mpeg, it may appear larger than the disc capacity, and in reality u can fit 74min on a CDR74.

SVCD -
SVCD is an mpeg2 based (same as DVD) which allows variable bit-rates of up to 2500kbits at a resolution of 480x480 (NTSC) which is then decompressed into a 4:3 aspect ratio when played back. Due to the variable bit-rate, the length you can fit on a single CDR is not fixed, but generally between 35-60 Mins are the most common. To get a better SVCD encode using variable bit-rates, it is important to use multiple "passes". this takes a lot longer, but the results are far clearer.

XVCD/XSVCD -
These are basically VCD/SVCD that don't obey the "rules". They are both capable of much higher resolutions and bit-rates, but it all depends on the player to whether the disc can be played. X(S)VCD are total non-standards, and are usually for home-ripping by people who don't intend to release them.

DivX / XviD -
DivX is a format designed for multimedia platforms. It uses two codecs, one low motion, one high motion. most older films were encoded in low motion only, and they have problems with high motion too. A method known as SBC (Smart Bit-rate Control) was developed which switches codecs at the encoding stage, making a much better print. The format is Ana orphic and the bit-rate/resolution are interchangeable. Due to the higher processing power required, and the different codecs for playback, its unlikely we'll see a DVD player capable of play DivX for quite a while, if at all. There have been players in development which are supposedly capable, but nothing has ever arisen. The majority of PROPER DivX rips (not Re-Encs) are taken from DVDs, and generally up to 2hours in good quality is possible per disc. Various codecs exist, most popular being the original Divx3.11a and the new XviD codecs.

CVD -
CVD is a combination of VCD and SVCD formats, and is generally supported by a majority of DVD players. It supports MPEG2 bit-rates of SVCD, but uses a resolution of 352x480(ntsc) as the horizontal resolution is generally less important. Currently no groups release in CVD.

DVD-R -
Is the recordable DVD solution that seems to be the most popular (out of DVD-RAM, DVD-R and DVD+R). it holds 4.7gb of data per side, and double sided discs are available, so discs can hold nearly 10gb in some circumstances. SVCD mpeg2 images must be converted before they can be burnt to DVD-R and played successfully. DVD>DVDR copies are possible, but sometimes extras/languages have to be removed to stick within the available 4.7gb.

MiniDVD -
MiniDVD/cDVD is the same format as DVD but on a standard CDR/CDRW. Because of the high resolution/bit-rates, its only possible to fit about 18-21 mins of footage per disc, and the format is only compatible with a few players.

Misc. Info

Regional Coding -
This was designed to stop people buying American DVDs and watching them earlier in other countries, or for older films where world distribution is handled by different companies. A lot of players can either be hacked with a chip, or via a remote to disable this.

RCE -
RCE (Regional Coding Enhancement) was designed to overcome "Multiregion" players, but it had a lot of faults and was overcome. Very few titles are RCE encoded now, and it was very unpopular.

Macrovision -
Macrovision is the copy protection employed on most commercial DVDs. Its a system that will display lines and darken the images of copies that are made by sending the VHS signals it can't understand. Certain DVD players (for example the Dansai 852 from Tescos) have a secret menu where you can disable the macrovision, or a "video stabaliser" costs about 30UKP from Maplin (
Code:
www.maplin.co.uk
)

NTSC/PAL -
NTSC and PAL are the two main standards used across the world. NTSC has a higher frame rate than pal (29fps compared to 25fps) but PAL has an increased resolution, and gives off a generally sharper picture. Playing NTSC discs on PAL systems seems a lot easier than vice-versa, which is good news for the Brits icon_smile.gif An RGB enabled scart lead will play an NTSC picture in full colour on most modern tv sets, but to record this to a VHS tape, you will need to convert it to PAL50 (not PAL60 as the majority of DVD players do.) This is either achieved by an expensive converter box (in the regions of £200+) an onboard converter (such as the Dansai 852 / certain Daewoos / Samsung 709 ) or using a World Standards VCR which can record in any format.

News Sites -
There are generally 2 news sites, and I'm allowed to be biased icon_smile.gif For Games/Apps/Console ::
Code:
www.isonews.com
is generally regarded as the best, but for VCD/SVCD/DivX/TV/XXX
Code:
www.vcdquality.com
displays screen grabs and allows feedback. **NOTICE** neither site offers movie downloads, and requesting movies/trades etc on the forums of either is NOT permitted.

Release Files

RARset -
The movies are all supplied in RAR form, whether its v2 (rar>.rxx) or v3 (part01.rar > partxx.rar) form.

BIN/CUE -
VCD and SVCD films will extract to give a BIN/CUE. Load the .CUE into notepad and make sure the first line contains only a filename, and no path information. Then load the cue into Nero/CDRWin etc and this will burn the VCD/SVCD correctly. TV rips are released as MPEG. DivX files are just the plain DivX - .AVI

NFO -
An NFO file is supplied with each movie to promote the group, and give general iNFOrmation about the release, such as format, source, size, and any notes that may be of use. They are also used to recruit members and acquire hardware for the group.

SFV -
Also supplied for each disc is an SFV file. These are mainly used on site level to check each file has been uploaded correctly, but are also handy for people downloading to check they have all the files, and the CRC is correct. A program such as pdSFV or hkSFV is required to use these files.

Usenet Information

Access -
To get onto newsgroups, you will need a news server. Most ISPs supply one, but this is usually of poor retention (the amount of time the files are on server for) and poor completition (the amount of files that make it there). For the best service, a premium news server should be paid for, and these will often have bandwidth restrictions in place.

Software -
You will need a newsreader to access the files in the binary newsgroups. There are many different readers, and its usually down to personal opinion which is best. Xnews / Forte Agent / BNR 1 / BNR 2 are amongst the popular choices. Outlook has the ability to read newsgroups, but its recommended to not use that.

Format -
Usenet posts are often the same as those listed on VCDQUALiTY (i.e., untouched group releases) but you have to check the filenames and the description to make sure you get what you think you are getting. Generally releases should come down in .RAR sets. Posts will usually take more than one day to be uploaded, and can be spread out as far as a week.

PAR files -
As well as the .rxx files, you will also see files listed as .pxx/.par . These are PARITY files. Parity files are common in usenet posts, as a lot of times, there will be at least one or two damaged files on some servers. A parity file can be used to replace ANY ONE file that is missing from the rar set. The more PAR files you have, the more files you can replace. You will need a program called SMARTPAR for this.

Scene Tags

PROPER -
Due to scene rules, whoever releases the first Telesync has won that race (for example). But if the quality of that release is fairly poor, if another group has another telesync (or the same source in higher quality) then the tag PROPER is added to the folder to avoid being duped. PROPER is the most subjective tag in the scene, and a lot of people will generally argue whether the PROPER is better than the original release. A lot of groups release PROPERS just out of desperation due to losing the race. A reason for the PROPER should always be included in the NFO.

SUBBED -
In the case of a VCD, if a release is subbed, it usually means it has hard encoded subtitles burnt throughout the movie. These are generally in malaysian/chinese/thai etc, and sometimes there are two different languages, which can take up quite a large amount of the screen. SVCD supports switch able subtitles, so some DVDRips are released with switch able subs. This will be mentioned in the NFO file if included.

UNSUBBED -
When a film has had a subbed release in the past, an Unsubbed release may be released

LIMITED -
A limited movie means it has had a limited theater run, generally opening in less than 250 theaters, generally smaller films (such as art house films) are released as limited.

INTERNAL -
An internal release is done for several reasons. Classic DVD groups do a lot of .INTERNAL. releases, as they wont be dupe'd on it. Also lower quality theater rips are done INTERNAL so not to lower the reputation of the group, or due to the amount of rips done already. An INTERNAL release is available as normal on the groups affiliate sites, but they can't be traded to other sites without request from the site ops. Some INTERNAL releases still trickle down to IRC/Newsgroups, it usually depends on the title and the popularity. Earlier in the year people referred to Centropy going "internal". This meant the group were only releasing the movies to their members and site ops. This is in a different context to the usual definition.

STV -
Straight To Video. Was never released in theaters, and therefore a lot of sites do not allow these.

ASPECT RATIO TAGS -
These are *WS* for widescreen (letterbox) and *FS* for Fullscreen

RECODE -
A recode is a previously released version, usually filtered through TMPGenc to remove subtitles, fix color etc. Whilst they can look better, its not looked upon highly as groups are expected to obtain their own sources.

REPACK -
If a group releases a bad rip, they will release a Repack which will fix the problems.

NUKED -
A film can be nuked for various reasons. Individual sites will nuke for breaking their rules (such as "No Telesyncs") but if the film has something extremely wrong with it (no soundtrack for 20mins, CD2 is incorrect film/game etc) then a global nuke will occur, and people trading it across sites will lose their credits. Nuked films can still reach other sources such as p2p/usenet, but its a good idea to check why it was nuked first in case. If a group realise there is something wrong, they can request a nuke.

NUKE REASONS :: this is a list of common reasons a film can be nuked for (generally DVDRip)

** BAD A/R ** :: bad aspect ratio, ie people appear too fat/thin
** BAD IVTC ** :: bad inverse telecine. process of converting framerates was incorrect.
** INTERLACED ** :: black lines on movement as the field order is incorrect.

DUPE -
Dupe is quite simply, if something exists already, then theres no reason for it to exist again without proper reason.

Make ur Internet n Bandwidth Rapid - Rapid Speeds (Windows XP/98)

1.Increase bandwidth by tweaking QoS in Windows XP Pro

The following tweak applies only to Windows XP Professional edition.

The default system behavior is that all 100% bandwidth is available, however, if there is a running application that indicates to the OS it needs to send high priority/real time data, then as long as it has the socket open, Windows XP will restrict “best effort” traffic to 80% of the bandwidth so that high priority traffic can be accommodated. Basically, applications can make this request to the operating system for QoS support using the QoS application programming interfaces (APIs) in Windows and this only applies if a specific app is requesting QoS.

If you'd like to change how much bandwidth is reserved for QoS (the default is 20% of the total bandwidth), do the following:

1. Make sure you're logged in as "Administrator" (not just any account with admin privileges).
2. Navigate to START>Run and type: gpedit.msc
3. Navigate to Local Computer Policy > Administrative Templates > Network > QOS Packet Scheduler
4. In the right window, double-click the limit reservable bandwidth setting
5. On the setting tab, check the enabled setting.
6. Where it says "Bandwidth limit %", change it to read 0 (or whatever percentage you want to reserve for high priority QoS data)
7. Click OK, close gpedit.msc

Under START > My Computer > My Network Connections > View Network Connections, right-click on your connection and under Properties (where it lists your protocols), make sure QOS Packet Scheduler is enabled.



The tweak desribed below helps boost priority for DNS & hostname resolution in general. What this means is, it helps web pages load faster, and has negligible effect on downloads (not counting the couple of ms gain with the host resolution at connect-time).

Applying this tweak assumes some proficiency in editing the Windows Registry using Regedit (Start > Run > type: regedit). As always, backup your Registry before making any changes so you can revert to the previous state if you don't like the results.


2.Host Resolution Priority Tweak
host name resolution priority

Windows 2k/XP

First, open the Windows Registry using Regedit, and (after backing up) navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProvider



Note the following lines (all hex dwords):
Class = 008 (8) - indicates that TCP/IP is a name service provider, don't change.

LocalPriority = 1f3 (499) - local names cache
HostsPriority = 1f4 (500) - the HOSTS file
DnsPriority = 7d0 (2000) - DNS
NetbtPriority = 7d1 (2001) - NetBT name-resolution, including WINS

What we're aiming to do is increase the priority of the last 4 settings, while keeping their order. The valid range is from -32768 to +32767 and lower numbers mean higher priority compared to other services. What we're aiming at is lower numbers without going to extremes, something like what's shown below should work well:

Change the "Priority" lines to:
LocalPriority = 005 (5) - local names cache
HostsPriority = 006 (6) - the HOSTS file
DnsPriority = 007 (7) - DNS
NetbtPriority = 008 (8) - NetBT name-resolution, including WINS

Windows 9x/ME

The tweak is essentialy the same as in Windows 2000/XP, just the location in the Registry is slightly different. For a more detailed description see the Windows 2000/XP section above.

Open the Windows Registry using Regedit, and (after backing up) navigate to:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP\ServiceProvider

You should see the following settings:
Class=hex:08,00,00,00

LocalPriority=hex:f3,01,00,00
HostsPriority=hex:f4,01,00,00
DnsPriority=hex:d0,07,00,00
NetbtPriority=hex:d1,07,00,00

The "priority" lines should be changed to:
LocalPriority=hex:05,00,00,00
HostsPriority=hex:06,00,00,00
DnsPriority=hex:07,00,00,00
NetbtPriority=hex:08,00,00,00

Reboot for changes to take effect.


In addition to the tweaks already covered in Win 2k/XP Registry Tweaks and More Win 2k/XP Tweaks, the Windows XP Service Pack 2 introduces a few new issues covered in the article below. Please make sure you understand what you are doing before making any changes to your Operating System. Note the information below only applies to Windows XP Service Pack 2.



3.Remove the limit on TCP connection attempts

Windws XP SP2 introduces a few new twists to TCP/IP in order to babysit users and "reduce the threat" of worms spreading fast without control. In one such attempt, the devs seem to have limited the number of possible TCP connection attempts per second to 10 (from unlimited in SP1). This argumentative feature can possibly affect server and P2P programs that need to open many outbound connections at the same time.

Rant: The forward thinking of Microsoft developers here is that you can only infect 10 new systems per second via TCP/IP ?!?... If you also consider that each of those infected computers will infect 10 others at the same rate:
second 1: 1+10 computers
second 2: 10+10*10 computers (110 new ones)
second 3: 10+100*10 computers ( 1110 new ones)
second 4: 10+1000*10 computers (11110 new ones)
....
all the way to 10*60 + 10^60 computers in a single minute (that's a number with 60 digits, or it would far exceed Earth's population). Even if we consider that 90% of those computers are unreachable/protected, one would still reach ALL of them within a minute.

In other words, even though it is not going to stop worm spreading, it's going to delay it a few seconds, limit possible network congestion a bit, and limit the use of your PC to 10 connection attempts per second in the process ! I have no problem with the new default setting limiting outbound connection attempts. Still, users should have the option to easily disable or change this setting. I might be going out on a limb here, but ever since the introduction of Windows XP I can't help thinking that I dislike all the bult-in Windows "wisardry" in a sense that the system also limits user access. That irritating trend to ease the mental load on end users is somewhat insulting, considering that Windows is to make the more "intelligent" choice instead of the end user, as well as limit their access to tuning such settings...
End of rant.

With the new implementation, if a P2P or some other network program attempts to connect to 100 sites at once, it would only be able to connect to 10 per second, so it would take it 10 seconds to reach all 100. In addition, even though the setting was registry editable in XP SP1, it is now only possible to edit by changing it directly in the system file tcpip.sys. To make matters worse, that file is in use, so you also need to be in Safe mode in order to edit it.

You only need to worry about the number of connection attempts per second if you have noticed a slowdown in network programs requiring a number of connections opened at once. You can check if you're hitting this limit from the Event Viewer, under System - look for TCP/IP Warnings saying: "TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts". Keep in mind this is a cap only on incomplete outbound connect attempts per second, not total connections. Still, running servers and P2P programs can definitely be affected by this new limitation. Use the fix as you see fit.

To change or remove the limit, you can use the following program:

Event ID 4226 Patcher v2.11


Code:
http://www.speedguide.net/files/xp_sp2/EvID4226Patch211a-en.zip


- A patching program for removing or changing the limit imposed on connection attempts in SP2. The patcher has the ability to restore tcpip.sys back to the original... Still, you might want to back up tcpip.sys, use it at your own risk. The author of this patch can be reached @ http://www.lvllord.de/

4. Recommended settings for Windows 2000 / XP
Windows 2000 & XP, unlike NT supports large windows as described in RFC1323 ( the 'RcvWindow' has a maximum value of 2**30 rather than 64K), and includes some other improvements over its predecessors you can use to speed up any TCP/IP transfers. , the descriptions and other options are added to provide you with better understanding and enable you to customize your settings.

All the following entries, unless otherwise noted should be placed in the Windows 2000/XP Registry under the key

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

TCPWindowSize

The value of TCP Window in the Windows 2000 Registry is DWORD, representing number of bytes, with range from 0 to 2^30. The recommended values (in red) optimize TCP for any high speed Internet connection and work best in most cases, however if you'd like to use a custom value follow these guidelines:

For best results, the TCPWindow should be a multiple of MSS (Maximum Segment Size). MSS is generally MTU - 40, where MTU (Maximum Transmission Unit) is the largest packet size that can be transmitted. MTU is usually 1500 (1492 for PPPoE connections). To determine the MTU value of your ISP, check out the Advanced Registry Editing section of our site.

There are three places in the Windows 2000 Registry where you can add the TCP Window parameter.

HKLM/SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
GlobalMaxTcpWindowSize="256960" (DWORD, number of bytes) Valid range is from MSS to 2^30. Add the value as a decimal. Note: For best results RWIN has to be a multiple of MSS lower than 65535 times a scale factor that's a power of 2, i.e. 44 x 1460 = 64240 x 2^2 = 256960. If you choose to use a RWIN lower than 65535, you can simply make it multiple of MSS and turn scaling off (Tcp1323Opts=0)

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
TcpWindowSize="256960" (DWORD, number of bytes) Valid range is from MSS to 2^30. Add the value as a decimal. TcpWindowSize can also exist under TcpipParametersInterface - if added at this location, it overrides the global setting for this particular . Note (10/20/00): Seems MS has found another bug in Windows 2000, the TCPWindowSize should be configured with the global setting (GlobalMaxTcpWindowsSize) rather than this one - Q263088

Note: For best results RWIN has to be a multiple of MSS lower than 65535 times a scale factor that's a power of 2, i.e. 44 x 1460 = 64240 x 2^2 = 256960. If you choose to use a RWIN lower than 65535, you can simply make it multiple of MSS and turn scaling off (Tcp1323Opts=0)

Tcp1323Opts

Tcp1323Opts is a necessary setting in order to enable Large TCPWindow support as described in RFC 1323. Without this parameter, the TCPWindow is limited to 64K.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Tcp1323Opts="1" (DWORD, recommended setting is 1. The possible settings are 0 - Disable RFC 1323 options, 1 - Window scaling but no Timestamp options, 3 - Window scaling and Time stamp options.)

Note: Tcp1323Opts="3" might help in some cases where there is increased packet loss, however generally you'll achieve better throughput with Tcp1323Opts="1", since Timestamps add 12 bytes to the header of each packet.

DefaultTTL

DefaultTTL determines the time in seconds and the number of hops a packet lives. While it does not directly affect speed, a larger value increases the amount of time it takes for a packet to be considered lost, discarded and retransmitted. A value that's too small can cause packets to be unable to reach distant servers at all.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
DefaultTTL="64" (DWORD, recommended setting is 64. Other settings that are widely used are 128 and 32)

EnablePMTUDiscovery

When set to 1 (True), TCP attempts to discover MTU automatically over the path to a remote host. Setting this parameter to 0 causes MTU to default to 576 which reduces overall performance over high speed connections. Note that this setting is different than our Windows 9x recommendation.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
EnablePMTUDiscovery="1" (DWORD - boolean, valid settings are 0-->False and 1-->True. Many connections perform better with this entry at 1, however, if you prefer to set your upstream to send fixed 1500 packets, you might want to use 0 instead). When set at 1, establishing connections and initial transfer speed might slow down a bit, however you will get better throughput if somewhere in the path large packets need to be fragmented.

EnablePMTUBHDetect

Setting this parameter to 1 (True) enables "black hole" routers to be detected, however it also increases the maximum number of retransmissions for a given segment. In most cases you'd want to keep BHDetect to 0 (False).

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
EnablePMTUBHDetect="0" (DWORD - boolean, valid settings are 0-->False and 1-->True. Recommended setting is 0)

SackOpts

This parameter controls whether or not SACK (Selective Acknowledgement) support is enabled, as specified in RFC 2018. SACK is especially important for connections using large TCP Window sizes.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
SackOpts="1" (DWORD - boolean, recommended setting is 1. Possible settings are 0 - No Sack options or 1 - Sack Option enabled).

TcpMaxDupAcks

This parameter determines the number of duplicate ACKs that must be received for the same sequence number of sent data before "fast retransmit" is triggered to resend the segment that has been dropped in transit.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
TcpMaxDupAcks="2" (DWORD - range 1-3, recommended setting is 2).



Patches


This Includes

1. sguide_tweak_2k.zip
Description: Generic patch for Windows XP and Windows 2000 (all versions). This patch will optimize your TCP/IP Registry settings for high speed Internet connections. To install, extract the .inf file first, then double-click (or right-click on filename and choose install from the pull-down menu) and reboot for changes to take effect.

Code:
http://www.speedguide.net/files/sguide_tweak_2k.zip


2.sguide_tweak_2k_pppoe.zip

Description: Generic patch for Windows XP/2000 and DSL connections using PPPoE. This patch will optimize your TCP/IP Registry settings for high speed Internet connections. It is specifically designed for PPPoE DSL connections. To install, extract the .inf file first, then double-click (or right-click on filename and choose install from the pull-down menu) and reboot for changes to take effect.

Code:
http://www.speedguide.net/files/sguide_tweak_2k_pppoe.zip



3. winxp_dnscache.zip

Description: Patch Windows 2k/XP not to cache failed DNS entries. By default, when a DNS lookup fails (due to temporary DNS problems), Windows still caches the unsuccessful DNS query, and in turn fails to connect to a host regardless of the fact that the DNS server might be able to handle your lookup seconds later. This patch fixes the problem by configuring the DNS client to continue sending queries to an unresponsive network. To install, save to your HD, unzip the .reg file, then double-click the filename.

Web Patches - faster loading of Web Pages

The following patch increases Web page loading speed, by doubling the number of possible concurrent open connections. For example, imagine a web page has 20 images and some text - in order for your browser to get all these files, it opens 2 or 4 concurrent connections, depending on the Web server. Increasing the number of open connections allows for faster retrieving of the data. Please note that the patch sets some values outside of the HTML specs. If you decide to install it, backup your Registry first. Changes will take effect after you reboot. Download the patch appropriate for your OS:

OS: Windows 9x/ME

Code:
http://www.speedguide.net/files/sg_webtweak_9x.zip


OS: Windows 2K/XP/2k3

Code:
http://www.speedguide.net/files/sg_webtweak_2k.zip


TCP OPTIMISER

Image

Description: The TCP Optimizer is a free, easy Windows program that provides an intuitive interface for tuning and optimizing your Internet connection. Just download and run, there is no installaion required. The program makes it easy to find the best MTU and RWIN values, test latency and tweak all the important broadband related registry parameters. The Optimizer can be helpful with tuning any Internet connection type, from dialup to Gigabit+

Code:
http://rapidshare.com/files/258758467/TCPOptimizer.rar


ENJOY !!!!!!!!!!

Make ur Internet n Bandwidth Rapid - Rapid Speeds (Vista/2008)

TCP/IP tweaks, patches & Manual registry hacks for Windows Vista/2008

Note: Most of them may work on Windows 7


For people who wants to skip the technical part and wants the optimal Internet setting download the below patch which does everything except for "gaming tweak" (mentioned at the end of the post)


Code:
http://rapidshare.com/files/257722757/Vista_TCPIP_Patch.zip


To apply the above patch save to your desktop and run as administrator (right-click -> run as administrator). Click Y when prompted to apply settings.

To apply, save to your desktop and run as administrator (right-click -> run as administrator). Click Y when prompted to apply settings.

Windows Vista / 2008 Tweaks

Windows Vista introduces a number of new features to the TCP/IP stack, including CTCP, and TCP Window Auto-Tuning. This new implementation works much better by default than previous Windows versions with broadband internet connections, and is able to adjust the RWIN value on the fly, depending on the BDP (bandwidth-delay product). This, however, introduces some problems with older routers and restricts the user from tweaking some of the TCP/IP parameters. Still, there is always some room for improvement, and this article explains known the tweakable TCP/IP parameters.

To enter some of the commands below, you will need to run "elevated" command prompt. To do so, click the Start icon > Run > type: cmd , then click CTRL+SHIFT+ENTER. Alternatively, you can navigate to Start > All Programs > Accessories > right-click Command Prompt and choose "Run as Administrator

Check the TCP/IP state

To check the current status of the Vista TCP/IP tweakable parameters, in elevated command prompt type the following command:

netsh int tcp show global

You will be presented with something like the following:

Image

The settings, as well as their default and recommended state are explained below. The two most important tweakable parameters are "Auto-Tuning Level" and "Congestion Control Provider".


TCP Auto-Tuning


To turn off the default RWIN auto tuning behavior, (in elevated command prompt) type:

netsh int tcp set global autotuninglevel=disabled

The default auto-tuning level is "normal", and the possible settings for the above command are:

disabled: uses a fixed value for the tcp receive window. Limits it to 64KB (limited at 65535).
higlyrestricted: allows the receive window to grow beyond its default value, very conservatively
restricted: somewhat restricted growth of the tcp receive window beyond its default value
normal: default value, allows the receive window to grow to accommodate most conditions
experimental: allows the receive window to grow to accommodate extreme scenarios (not recommended, it can degrade performance in common scenarios, only intended for research purposes. It enables RWIN values of over 16 MB)

Our recommendation: normal (unless you're experiencing problems).

If you're experiencing problems with your NAT router or SPI firewall, try the "restricted", "highlyrestricted", or even "disabled" state.

Notes:
- Reportedly, many home NAT routers with a SPI firewall may have problems with enabled tcp auto-tuning in it's "normal" state, resulting in slow speeds, packet loss, and general reduced network performance.
- auto-tuning also causes problems with older routers that do not support TCP Windows scaling.
- netsh set commands take effect immediately after executing, there is no need to reboot.
- sometimes when using "normal" mode and long lasting connections (p2p software / torrents), tcp windows can get very large and consume too much resources, if you're experiencing problems try a more conservative setting.

If you're experiencing problems with Auto-Tuning, see also:
MS KB 835400 - email issues
MS KB 934430 - network connectivity behind firewall problems
MS KB 940646 - 3G WWAN throughput issues
MS KB 929868 - web browsing issues
MS KB 932170 - slow network file transfer

The above are the M$ Knowledge based articles. To view them input the following in your browser

Code:
http://support.microsoft.com/kb/<insert number here>


Example to view MS KB 83540 type in:
Code:
http://support.microsoft.com/kb/935400


Compound TCP - Improve throughput

The traditional slow-start and congestion avoidance algorithms in TCP help avoid network congestion by gradually increasing the TCP window at the beginning of transfers until the TCP Receive Window boundary is reached, or packet loss occurs. For broadband internet connections that combine high TCP Window with higher latency (high BDP), these algorithms do not increase the TCP windows fast enough to fully utilize the bandwidth of the connection.

Compound TCP (CTCP) is a newer method, available in Vista and Server 2008 (there is also a hotfix available for XP/2003). CTCP increases the TCP send window more aggressively for broadband connections (with large RWIN and BDP). CTCP attempts to maximize throughput by monitoring delay variations and packet loss. It also ensures that its behavior does not impact other TCP connections negatively.

By default, Vista has CTCP turned off, and Server 2008 turned on. Turning this option on can significantly increase throughput.

To enable CTCP, in elevated command prompt type:

netsh int tcp set global congestionprovider=ctcp

To disable CTCP:

netsh int tcp set global congestionprovider=none

Possible options are: ctcp, none, default (restores the system default value).
Recommended setting: ctcp

It is better to use this newer generation CTCP congestion control algorithm for most broadband connections, I recommend it being turned on.

ECN Capability

ECN (Explicit Congestion Notification) is a mechanism that provides routers with an alternate method of communicating network congestion. It is aimed to decrease retransmissions. In essence, ECN assumes that the cause of any packet loss is router congestion. It allows routers experiencing congestion to mark packets and allow clients to automatically lower their transfer rate to prevent further packet loss. ECN is disabled by default in Vista, as it is possible that it may cause problems with some older routers that do not support this feature.

To check whether your router supports ECN, you can use the Microsoft Internet Connectivity Evaluation Tool
Code:
http://www.microsoft.com/windows/using/tools/igd/default.mspx


. The results will be displayed under "Traffic Congestion Test".

To enable ECN, in elevated command prompt type:

netsh int tcp set global ecncapability=enabled

Possible settings are: enabled, disabled, default (restores the state to the system default).
The default state is: disabled
Our recommendation: disabled

RSS - Receive-side Scaling


The receive-side scaling setting enables parallelized processing of received packets on multiple processors, while avoiding packet reordering. It avoids packet reordering y separating packets into "flows", and using a single processor for processing all the packets for a given flow. Packets are separated into flows by computing a hash value based on specific fields in each packet, and the resulting hash values are used to select a processor for processing the flow. This approach ensures that all packets belonging to a given TCP connection will be queued to the same processor, in the same order that they were received by the network adapter.

To set RSS:

netsh int tcp set global rss=enabled

Possible rss settings are: disabled, enabled, default (restores rss state to the system default).
Default state is: enabled
Recommended: enabled (if you have 2 or more processor cores and a NIC that can handle RSS)

Manually tuning Registry Parameters

Many of the registry keys tuning TCP/IP parameters from previous Windows versions no longer work in Vista and Server 2008. Below is a list of the few we've confirmed to still work. Note that for changes to these settings to take effect the computer needs to be rebooted. As always, a registry backup is recommended if making any changes, and some proficiency in using regedit is required.

In regedit (Start icon > Run > type: regedit while logged in as administrator), you can navigate and edit the following keys.

MTU (Maximum Transmission Unit) - the maximum packet size.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{...}\
MTU=1500 (DWORD, entry does not exist by default)

The {....} part of the above path is the unique identifier of your network adapter. You can recognize the correct adapter by looking at it's IP address, if obtaining IP automatically labeled by: DhcpIPAddress=192.168.x.x text value, for example.

We recommend leaving this at default, unless you want to lower it. Vista uses the largest possible packet size for the underlying network by default.

Note: In some test environments, the correct MTU entry may be offset by 8. The 8 offset seems to coincide with the size of the PPPoE overhead. Check the result with the TCP Analyzer.



TCP 1323 Options

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
Tcp1323Opts=1
(DWORD, entry created automatically by Windows when you run the "netsh int tcp set global autotuninglvl=..." command, set to 0 by default).

Setting this seems to have no effect, since auto-tuning uses the TCP 1323 scale factor and changes it on the fly, disregarding this setting. Additional testing may be required to determine it's effect if auto-tuning is turned off. Setting it to 1 is best for broadband connections.



NetDMA


NetDMA enables support for advanced direct memory access. In essence, it provides the ability to more efficiently move network data by minimizing CPU usage. NetDMA frees the CPU from handling memory data transfers between network card data buffers and application buffers by using a DMA engine.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
EnableTCPA=1
(DWORD, 1 to enable, 0 to disable NetDMA. Value not present by default in Vista)

Recommended setting is 1, a new DWORD value may need to be created if not already present in the registry.



DefaultTTL


TTL can be safely left alone in many cases. It is a limit to the time and number of hops/routers a packet will travel before being discarded. A number that's too small risks packets being discarded before reaching their destination. A number that's too large (over 128) will cause delay in when lost IP packets are discarded.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
DefaultTTL=64
(DWORD, set to a decimal value between 32 and 128. Recommended: 64)



TcpMaxDataRetransmissions

Determines how many times unacknowledged data (non-connect segment) is retransmitted before TCP aborts the connection. The retransmission timeout is doubled with each successive retransmission on a connection. It is reset when responses resume.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
TCPMaxDataRetransmissions=7
(DWORD, recommended: between 3 and 10, default registry value 255, default 5 in documentation)



SynAttackProtect

This undocumented setting provides protection against SYN denial of service (DoS) attacks. When enabled, connections timeout sooner if SYN attack is detected. When set at 1, TCPMaxDataRetransmissions can be lowered further.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
SynAttackProtect=1
(DWORD, recommended: 1, not present in registry by default)

TcpTimedWaitDelay (port allocation)

Short lived (ephemeral) TCP/IP ports above 1024 are allocated as needed by the OS. The default Vista values have improved from previous Windows versions, and are usually sufficient under normal load. However, in some instances under heavy load it it may be necessary to adjust the settings below to tweak the availability of user ports requested by an application.

If the default limits are exceeded under heavy loads, the following error may be observed: "address in use: connect exception". By default under Vista (when the values are not presend in the registry), the OS can allocate up to 16384 ephemeral ports above port 1024, and the OS waits for 120 seconds before reclaiming ports after an application closes the TCP connection. This is a considerable improvement over older Windows versions. However, if necessary, the following registry values can be added/edited:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
MaxUserPort=65535
(DWORD, not in the registry by default. Recommended: leave at default, or use a number above 16384 up to 65535 decimal as necessary) - maximum number of ports to use. 1024 is automatically subtracted from entered value to allow for reserved ports under 1024.
TcpTimedWaitDelay=30 (DWORD, 0xffffffff in registry by default. Recommended: 30 decimal, denoting 30 seconds) - time to wait before reclaiming ports, in seconds. Default time before reclaiming ports, if value is at 0xffffffff or not present in the registry is 120 seconds. Just reducing the delay is often sufficient without changing MaxUserPort, as it allows for reusing ports more efficiently.

Ephemeral ports can be checked and changed using netsh as well.

To query the current values, in command prompt, type:
netsh int ipv4 show dynamicportrange tcp (for UDP, use the same command, replacing only "tcp" with "udp" at the end)

To set both the starting, and max user port using netsh, in elevated command prompt run:
netsh int ipv4 set dynamicportrange protocol=tcp start=1025 num=64511 (start=NNN denoting the starting port, and num=NNN denoting the number of ports)

Notes:
By default, dynamic ports are allocated between ports 49152 and 65535 (for a total of 16384 ephemeral ports).
Using netsh allows to set both the starting port and port range. Editing the Registry allows for setting the port range, and the starting port is fixed at 1025. Deleting the MaxUserPort registry entry (or setting it to a value outside the allowed range) causes the OS to revert to using the default values.
Some system processes can install port filters to block certain port ranges. If ephemeral ports run into these filtered port ranges, TCP/IP applications will be unable to bind to any ports.



QoS Reserved Bandwidth

As with Windows XP, nework adapters have a "QoS Packet Scheduler" enabled by default, which reserves 20% of bandwidth by default for QoS applications that request priority traffic. Note this only has effect in the presence of running QoS applications that request priority traffic. Registry value is undocumented for the Vista version of Windows. To customize this setting, in the Windows Registry:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched
NonBestEffortLimit=0
(DWORD, not present in the registry by default. Recommended: 0 , possible values between 0 and 100) - indicates the percentage value of reserved bandwidth for QoS applications. Set to 0 to disable.

Notes: This tweak applies only to Windows versions that have Qos Packet Scheduler enabled. It will ONLY have effect in the presense of running QoS applications.



Gaming Tweak - Disable Nagle's algorithm

The tweak below allows for tweaking or disabling Nagle's alogrithm. Disabling "nagling" allows for very small packets to be transferred immediately without delay. Note that disabling Nagle's algorithm is only recommended for some games, and it may have negative impact on file transfers/throughput. The dafault state (Nagling enabled) improves performance by allowing several small packets to be combined together into a single, larger packet for more efficient transmission. While this improves overall performance and reduces TCP/IP overhead, it may briefly delay transmission of smaller packets. Keep in mind that disabling Nagle's algorithm may have some negative effect on file transfers, and can only help reduce delay in some games. To implement this tweak, in the registry editor (Start>Run>regedit) find:

This setting configures the maximum number of outstanding ACKs in Windows XP/2003/Vista/2008:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{NIC-id}
There will be multiple NIC interfaces listed there, for example: {1660430C-B14A-4AC2-8F83-B653E83E8297}. Find the correct one with your IP address listed. Under this {NIC-id} key, create a new DWORD value:
TcpAckFrequency=1 (DWORD value, 1=disable, 2=default, 2-n=send ACKs if outstanding ACKs before timed interval. Setting not present by default).

For gaming performance, recommended is 1 (disable). For pure throughput and data streaming, you can experiment with values over 2. If you try larger values, just make sure TcpAckFrequency*MTU is less than RWIN, since the sender may stop sending data if RWIN fills witout acknowledgement.

Also, find the following key (if present):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSMQ\Parameters
Add a new DWORD value:
TCPNoDelay=1
(DWORD value, 0 to enable Nagle's algorithm, 1 to disable, not present by default)

To configure the ACK interval timeout (only has effect if nagling is enabled), find the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{NIC-id}
TcpDelAckTicks=0
(DWORD value, default=2, 0=disable nagling, 1-6=100-600 ms). Note you can also set this to 1 to reduce the nagle effect from the default of 200ms without disabling it.

Notes:
Reportedly, the above gaming tweak (disabling nagle's algorithm) can reduce WoW (World of Warcraft) latency by almost half!
XP/2003 needs hotfix or SP2 for it to work (MS KB 815230)
Vista needs hotfix or SP1 for it to work (MS KB 935458)

[TUTORIAL] Flooding your Rewards Points on MegaUpload.

ImageEverything on the Tutorial was My Idea. My Own Experiance.
So Please feel FREE to Report Bugs and I will Correct My System. lol


This is a BASIC and VERY simple Guide.
The BEST part is that no matter What your Upload Speed is. It takes the same time foe evryone. Why? (Explain Futher below).


Video tutorial by spyece.

Code:
http://www.warez-bb.org/viewtopic.php?t=2897216


Step-1
Getting What's REQUIRED!
Go to
Code:
www.megaupload.com

Image

------------------------------------------------------------------
and then Sign-Up for a Free Account.
Code:
http://www.megaupload.com/signup/


Image

------------------------------------------------------------------

Download MegaManager to Upload.
Code:
http://www.megaupload.com/manager/


Image

-----------------------------------------------------------------

Download a Few Latest Movies/TV Show Episodes.

Movies
Code:
http://www.warez-bb.org/viewforum.php?f=4


TV Shows
Code:
http://www.warez-bb.org/viewforum.php?f=57




====================================





Step-2
Setting Up MegaManager to Upload & Uploading


Login to MegaManager Using your Free Account.

Image

-----------------------------------------------------------------

1. Click on MegaVideo TAB
2. And then the Upload TAB

Image

----------------------------------------------------------------

Upload a Few Movies/TV Shows
Make Sure that the Movies are Really Famous, and they are NEW!


NOTE: The Way How People with Slow Upload Speed can Upload as Fast as the People with High Upload Speeds are because when you slect a Movie to Upload to MegaVideo. Their Server Searches the Server whether that Video Has been Uploaded Before. like it checks all the Minute thing on the Video.

Because its Famous. Other's would have Uploaded it Before you. So When It Finds that the Video is on the Server. It Just Makes a Copy to your account. So its like you Uploaded. (Only Possible with MegaManager.)


Also Note: While Uploading don't put the Video's Real name.
For Example - One Tree Hill S05E12 put it as OTHS05E12
As MegaVideo Deletes these Movies Due to Copy Rights.
But when u put some other name there Server Doesnt Detect the Video.


Also dont Put a really Famous Movie/Episode the same day it was released as when the Hits Count Increase Rapidly, the Video gets Deleted. So Upload After 2-4 days After the Original Release.

Image

Image

Make Sure that you make it private because when it goes to the MegaVideo Site, it gets Exposed and the Video is deleted because of Copyrights!

----------------------------------------------------------------





====================================





Step-3
Making Your Movies Famous.

Go To:
Code:
www.surfthechannel.com

Image

----------------------------------------------------------------

Register there:
Code:
http://www.surfthechannel.com/page/register.html


Image

----------------------------------------------------------------

Then Login, and go to User CP
Image

----------------------------------------------------------------

Select the Category of the Movie your Submitting.
Image


***TV Show/Episode***

Image



***Movie***

Image

----------------------------------------------------------------

Statistics can be checked from here

Image

----------------------------------------------------------------

KEEP SUBMITTING, AFTER A WEEK OR SO.
YOU WILL HAVE UNBELIVEABLE AMOUNT OF REWARD POINTS.


This Was Me After a Week (well, more than a week actually Razz ).
Image


I Uploaded Tooo Much as I was Jobless, 10-20 Really Famous Vids are More than Enough Per Month, to Keep your Premium Account Alive.

Book Resource Copyright © 2011 -- Template created by O Pregador -- Powered by Blogger